support@averproducts.com
Please Note Direct Signature Required
Your information is safe and secure with our 256-bit encryption.
-
-
-
Best Customer Support
-
Free shipping
Features:
- Stepped grind fineness adjustment
- Height adjustable portafilter holder
- 1/2 pound bean hopper capacity
- 50mm flat stainless steel burrs
- 150 watt motor
- Brass Finish
- Dimensions: 15.1" High x 6" Wide x 9.9" Deep
- Made in Venice, Italy
Notes:
- Cleaning the parts on the Macap – before use, the bean hopper and covers should be cleaned with a mild, non-abrasive soap and rinsed.
- No retro kit available to upgrade older grinders.
- Please note as with all coffee grinders, it is very important to only change grind settings on Macap coffee grinders when the unit is powered ‘on’ and the burrs are in motion. If you do not do this, the burrs will ‘gunk’ up and require cleaning by you every time this occurs. Changing the grind settings when the burrs are not in motion will render the grinder to only produce very coarse grinds or no grinds at all. If this result occurs, this will be considered operator error for lack of following directions, and will not be classified as a defective grinder – meaning this is not covered under warranty. Macap grinders are considered commercial equipment for grinding coffee only and can not be returned once used.
Espresso Grinder Warning:
-
CLEANING WARNING: We recommend using grinder cleaning agents. We do not recommend any removal of the burrs or burr carrier for cleaning as re-assembly can cause damage.
-
ELECTRICAL WARNING: To avoid electrical damage to this espresso grinder which is not considered a manufacturer's defect, please acquire and install a single-outlet surge suppressor rated at 1080 joules or higher. The lack of the recommended surge suppressor, the espresso grinder can be damaged at the power switch, the capacitor, the motor, or the wiring.
Specifications
| Brand |
Macap |
|---|---|
| Height (inches) |
15.5, approximate |
| Width (inches) |
6, approximate |
| Depth (inches) |
10, approximate |
| Weight (pounds) |
11 |
| Wattage (watts) |
150 |
| Voltage (volts) |
110-120 |
| Burr size (mm) |
50 |
| Burr type |
flat |
| Burr speed (rpm) |
1680 |
| Hopper capacity (grams) |
250, approximate |
| Shipping | 3-7 business days (most products): 7-10 business days (commercial espresso machines delivered by pallet). Please note: Direct Signature Required |
| Delivery | Estimated between and . In stock Products ordered Mon-Fri before 2PM PST are processed within 24 hours and shipped in less than 72 hours. Weekends and Holidays excluded. |
Returns
To be eligible for a return your items must fall under these guidelines.
Returns accepted and refunds provided only on units deemed defective by Manufacture, and within first 5 days of customer receipt (may differ by brand). The following guideline(s) apply to all returns:
Products must be in new condition and unopened. Custom ordered products cannot be returned or refunded.
Returned products must be sent back with their original packaging and have all of the parts and components that they came with.
Please document (photograph) any damages upon receiving the item and report these damages to the delivery carrier if product was sent by LTL or freight.
Some items may additionally be subject to a restocking fee. Customer is responsible for return shipping and original shipping cost, even if the item was "free shipping".
We Highly recommend you read through our refund policy & return policy page as ALL brands have different terms in regard to returns and refund. Please contact us on a particular product that you are interested in and we will respond within 24 hours with the precise information for that product.
To request a return, please email us with your order number at support@averproducts.com and you will be issued a return authorization number (RA#). Your return authorization number must be clearly marked on all shipping labels and must be written on a note or your packing slip and placed inside the package. We are unable to accept general returns on items that require palletized shipping. You (the customer) are responsible for return shipping costs. Returns are subject to a 15% restocking fee.
Please Note (for espresso machines and grinders only)
• If there is any box damage, immediately note it on the Carrier Provider signature line. No notation means you (the customer) accepted the shipment in good order.
• If the arrives wet allow to air dry for at least 24 hours before plugging in. All units are drained after testing but not all water can be removed. Some water may dislodge during shipping.
• If there are any concealed damages or defects found once outside of the box, please notify us within 5 business days.
• You must keep the original box and packaging if the unit must be shipped back.
To be eligible for a return your items must fall under these guidelines.
Returns accepted and refunds provided only on units deemed defective by Manufacture, and within first 5 days of customer receipt (may differ by brand). The following guideline(s) apply to all returns:
Products must be in new condition and unopened. Custom ordered products cannot be returned or refunded.
Returned products must be sent back with their original packaging and have all of the parts and components that they came with.
Please document (photograph) any damages upon receiving the item and report these damages to the delivery carrier if product was sent by LTL or freight.
Some items may additionally be subject to a restocking fee. Customer is responsible for return shipping and original shipping cost, even if the item was "free shipping".
We Highly recommend you read through our refund policy & return policy page as ALL brands have different terms in regard to returns and refund. Please contact us on a particular product that you are interested in and we will respond within 24 hours with the precise information for that product.
To request a return, please email us with your order number at support@averproducts.com and you will be issued a return authorization number (RA#). Your return authorization number must be clearly marked on all shipping labels and must be written on a note or your packing slip and placed inside the package. We are unable to accept general returns on items that require palletized shipping. You (the customer) are responsible for return shipping costs. Returns are subject to a 15% restocking fee.
Please Note (for espresso machines and grinders only)
• If there is any box damage, immediately note it on the Carrier Provider signature line. No notation means you (the customer) accepted the shipment in good order.
• If the arrives wet allow to air dry for at least 24 hours before plugging in. All units are drained after testing but not all water can be removed. Some water may dislodge during shipping.
• If there are any concealed damages or defects found once outside of the box, please notify us within 5 business days.
• You must keep the original box and packaging if the unit must be shipped back.
To track your shipment please visit our 'Track Your Order' page in the main menu.
Please note: Direct Signature Required upon delivery.
Please note: Direct Signature Required upon delivery.
Summary
After your secured purchase, you'll receive an email confirmation and order number.
Items typically ship within 24 to 72 hours during business days. Once your item is shipped you'll receive an email with the tracking number.
You can track your order using our 'Track Your Order' page in the main menu above.
Please note commercial espresso machines will be shipped by pallet using freight carriers.
All orders require a signature, if you are having trouble tracking your order or have not received a tracking number within 3 business days, please give us a call at 1(800)281-1321 or email us at support@averproducts.com
After your secured purchase, you'll receive an email confirmation and order number.
Items typically ship within 24 to 72 hours during business days. Once your item is shipped you'll receive an email with the tracking number.
You can track your order using our 'Track Your Order' page in the main menu above.
Please note commercial espresso machines will be shipped by pallet using freight carriers.
All orders require a signature, if you are having trouble tracking your order or have not received a tracking number within 3 business days, please give us a call at 1(800)281-1321 or email us at support@averproducts.com
Description & Details
Features:
- Stepped grind fineness adjustment
- Height adjustable portafilter holder
- 1/2 pound bean hopper capacity
- 50mm flat stainless steel burrs
- 150 watt motor
- Brass Finish
- Dimensions: 15.1" High x 6" Wide x 9.9" Deep
- Made in Venice, Italy
Notes:
- Cleaning the parts on the Macap – before use, the bean hopper and covers should be cleaned with a mild, non-abrasive soap and rinsed.
- No retro kit available to upgrade older grinders.
- Please note as with all coffee grinders, it is very important to only change grind settings on Macap coffee grinders when the unit is powered ‘on’ and the burrs are in motion. If you do not do this, the burrs will ‘gunk’ up and require cleaning by you every time this occurs. Changing the grind settings when the burrs are not in motion will render the grinder to only produce very coarse grinds or no grinds at all. If this result occurs, this will be considered operator error for lack of following directions, and will not be classified as a defective grinder – meaning this is not covered under warranty. Macap grinders are considered commercial equipment for grinding coffee only and can not be returned once used.
Espresso Grinder Warning:
-
CLEANING WARNING: We recommend using grinder cleaning agents. We do not recommend any removal of the burrs or burr carrier for cleaning as re-assembly can cause damage.
-
ELECTRICAL WARNING: To avoid electrical damage to this espresso grinder which is not considered a manufacturer's defect, please acquire and install a single-outlet surge suppressor rated at 1080 joules or higher. The lack of the recommended surge suppressor, the espresso grinder can be damaged at the power switch, the capacitor, the motor, or the wiring.
Specifications
| Brand |
Macap |
|---|---|
| Height (inches) |
15.5, approximate |
| Width (inches) |
6, approximate |
| Depth (inches) |
10, approximate |
| Weight (pounds) |
11 |
| Wattage (watts) |
150 |
| Voltage (volts) |
110-120 |
| Burr size (mm) |
50 |
| Burr type |
flat |
| Burr speed (rpm) |
1680 |
| Hopper capacity (grams) |
250, approximate |
Shipping | Delivery
| Shipping | 3-7 business days (most products): 7-10 business days (commercial espresso machines delivered by pallet). Please note: Direct Signature Required |
| Delivery | Estimated between and . In stock Products ordered Mon-Fri before 2PM PST are processed within 24 hours and shipped in less than 72 hours. Weekends and Holidays excluded. |
Returns
Returns
To be eligible for a return your items must fall under these guidelines.
Returns accepted and refunds provided only on units deemed defective by Manufacture, and within first 5 days of customer receipt (may differ by brand). The following guideline(s) apply to all returns:
Products must be in new condition and unopened. Custom ordered products cannot be returned or refunded.
Returned products must be sent back with their original packaging and have all of the parts and components that they came with.
Please document (photograph) any damages upon receiving the item and report these damages to the delivery carrier if product was sent by LTL or freight.
Some items may additionally be subject to a restocking fee. Customer is responsible for return shipping and original shipping cost, even if the item was "free shipping".
We Highly recommend you read through our refund policy & return policy page as ALL brands have different terms in regard to returns and refund. Please contact us on a particular product that you are interested in and we will respond within 24 hours with the precise information for that product.
To request a return, please email us with your order number at support@averproducts.com and you will be issued a return authorization number (RA#). Your return authorization number must be clearly marked on all shipping labels and must be written on a note or your packing slip and placed inside the package. We are unable to accept general returns on items that require palletized shipping. You (the customer) are responsible for return shipping costs. Returns are subject to a 15% restocking fee.
Please Note (for espresso machines and grinders only)
• If there is any box damage, immediately note it on the Carrier Provider signature line. No notation means you (the customer) accepted the shipment in good order.
• If the arrives wet allow to air dry for at least 24 hours before plugging in. All units are drained after testing but not all water can be removed. Some water may dislodge during shipping.
• If there are any concealed damages or defects found once outside of the box, please notify us within 5 business days.
• You must keep the original box and packaging if the unit must be shipped back.
To be eligible for a return your items must fall under these guidelines.
Returns accepted and refunds provided only on units deemed defective by Manufacture, and within first 5 days of customer receipt (may differ by brand). The following guideline(s) apply to all returns:
Products must be in new condition and unopened. Custom ordered products cannot be returned or refunded.
Returned products must be sent back with their original packaging and have all of the parts and components that they came with.
Please document (photograph) any damages upon receiving the item and report these damages to the delivery carrier if product was sent by LTL or freight.
Some items may additionally be subject to a restocking fee. Customer is responsible for return shipping and original shipping cost, even if the item was "free shipping".
We Highly recommend you read through our refund policy & return policy page as ALL brands have different terms in regard to returns and refund. Please contact us on a particular product that you are interested in and we will respond within 24 hours with the precise information for that product.
To request a return, please email us with your order number at support@averproducts.com and you will be issued a return authorization number (RA#). Your return authorization number must be clearly marked on all shipping labels and must be written on a note or your packing slip and placed inside the package. We are unable to accept general returns on items that require palletized shipping. You (the customer) are responsible for return shipping costs. Returns are subject to a 15% restocking fee.
Please Note (for espresso machines and grinders only)
• If there is any box damage, immediately note it on the Carrier Provider signature line. No notation means you (the customer) accepted the shipment in good order.
• If the arrives wet allow to air dry for at least 24 hours before plugging in. All units are drained after testing but not all water can be removed. Some water may dislodge during shipping.
• If there are any concealed damages or defects found once outside of the box, please notify us within 5 business days.
• You must keep the original box and packaging if the unit must be shipped back.
Track Order
To track your shipment please visit our 'Track Your Order' page in the main menu.
Please note: Direct Signature Required upon delivery.
Please note: Direct Signature Required upon delivery.
Contact Us
Summary
After your secured purchase, you'll receive an email confirmation and order number.
Items typically ship within 24 to 72 hours during business days. Once your item is shipped you'll receive an email with the tracking number.
You can track your order using our 'Track Your Order' page in the main menu above.
Please note commercial espresso machines will be shipped by pallet using freight carriers.
All orders require a signature, if you are having trouble tracking your order or have not received a tracking number within 3 business days, please give us a call at 1(800)281-1321 or email us at support@averproducts.com
After your secured purchase, you'll receive an email confirmation and order number.
Items typically ship within 24 to 72 hours during business days. Once your item is shipped you'll receive an email with the tracking number.
You can track your order using our 'Track Your Order' page in the main menu above.
Please note commercial espresso machines will be shipped by pallet using freight carriers.
All orders require a signature, if you are having trouble tracking your order or have not received a tracking number within 3 business days, please give us a call at 1(800)281-1321 or email us at support@averproducts.com
Item Added to Your Cart
Add One of These Popular Items
3
visitors right now
3
visitors have this item in their cart right now
3
people have bought this item
3
% of people buy 2 or more
Related Products
